Foil Drive Assist PLUS Small Battery


Available in 10-15 days after order.


The Foil Drive that invented and introduced the world to the concept of retro-fit electric foil assist. The original kit with everything you need for hybrid foiling, mounted to the top side of your board. This is a great kit to enter the world of hybrid Foildriving.

The initial design of the Assist PLUS was for larger, SUP style boards. Not far down the track, riders we’re pushing the limits and more and more people began riding lower volume, prone style boards.
The main limitation of the Assist PLUS is the wireless connection between the electronics box, on the top of your board, and your hand controller. When riding a smaller board, the box must be mounted towards the front to limit the amount of water that passes over it.
Water is an incredibly difficult substance to transmit a wireless connection through. The connectivity of your Gen1 Foil Drive will improve the more the electronics box is out of the water.
Smaller boards also require more power, and chew through your battery much faster.

Gen1 Foil Drive Systems and Motor Cable Length
Gen1 Foil Drive systems feature an inbuilt, fixed motor with 200cm of cable length. This gives ample length to run the motor at any height on the mast with versatile box mounting options. Excess cable can be coiled up and tied off when not in use. Assist PLUS systems come with an inbuild cable that cannot be altered or changed and are fixed. If you chose to run an Integrated Mast, your Assist PLUS will become part of the mast setup.

How is it Mounted to the board?
Gen1 Foil Drive Systems mount to the top side of your board using a removable, adhesive backed, 3M Dual Lock. We have a range of accessories like the Mounting Base Plate that can be used with foot strap holes as an alternate mounting method.

Maximum Thrust: 25kg (55.1lbs) with Three Blade Alloy Props
Weight Range: 2.6 – 3.7kg (5.7-8.1lbs) depending on battery
Dimensions: L270 x W115 x H70mm

Operating Voltage: 28V
Runtime (Generalised): 30min-3hrs depending on use case, battery and other variables.
Recharge time: Appx. 2hrs (Standard Battery)

0.6kg – 4.2ah – 120.9Wh
The Small Battery has been designed for those with weight in mind. At 1/3 the weight and capacity of the Standard Battery, this is perfect for those using their motor in short bursts, to get on foil, then rider unpowered. As this battery runs the same voltage, with less cells, it cannot be used for Flatwater Foildriving as you are simply asking too much from each cell at one time. Small Batteries are also airline friendly with most carriers

Install weight: 3.7kg Operating Voltage: 28-32v Max Thrust: 24.5kg (Aluminium Propellers) Runtime (Generalised): 30min-3hrs depending on use case, battery and other variables.Recharge time: Appx. 2hrs (Standard Battery) Install time: 10mins

Additional Lithium-Ion battery for the Foil Drive Assist PLUS system only. Not compatible with Assist.

Standard 12.6ah Battery = 1.7kg
Small 4.2ah Battery = 0.6kg (Strictly no e-foiling)

The Small 4.2ah Battery is perfect for Wing Ding riders or competent Down Wind Foilers who want to reduce weight for pumping and turning and only need to use full power for very short periods to get up on foil.

Want to take your Foil Drive Assist PLUS on holidays with you? With the Small 4.2ah batteries, now you can! The Small Battery (120.9wh) is under the 160wh energy limit for airline travel.

Important: When flying on your chosen airline, be sure to contact them well before you fly. Please read this article for further direction as to the limitations and safety processes to follow when flying – DG rules are taken extremely seriously and must not be broken.

Grab one of our Small Battery Parallel Y Leads to join 2x Small 4.2ah Batteries together in parallel and enjoy your Assist PLUS with a medium capacity!

The battery is purpose designed, built, and tested especially for the Foil Drive Assist system. Every battery has been carefully manufactured and extensively tested in house, featuring a built-in Battery Management System (BMS) to ensure safety. The BMS manages the charge rate, balance of the individual cells, low and high voltage cut-off, internal resistance and temperature monitoring.

If you are purchasing a new battery and have an existing charger, you may require a V2 Battery Adaptor Lead. We have changed the plugs on the V2 batteries so original V1 Charger require this adaptor lead, you can learn more and purchase one HERE 

Foil Drive Assist Plus
Standard 12.6ah Battery
Aluminium Folding Propellers
Your chosen Mast Adaptor
Wireless Throttle Controller
Paddle Mount
V2 Universal Mounting Pod

3M Dual Lock (preinstalled) for mounting
3x Board Cable Guides (1x Short, 2x Long)
4x Mast Cable Guides
1x 2.5mm M3 Hex Driver (Spare Bolts inside)
Wrist Floaty
1x Lipo Safe Bag
Stubby Cooler for motor protection
Lithium Battery Charger (AUS or US Plug (To Specify)
Wireless charger for controller
1x Re-Usable Silicon Tie

Categorias: ,


Ainda não existem avaliações.

Seja o primeiro a avaliar “Foil Drive Assist PLUS Small Battery”

O seu endereço de email não será publicado. Campos obrigatórios marcados com *